Create Linux PPPOE configuration

1. Find the package >rp-pppoe rpm -qa | grep rp-pppoe
2. If not installed , install it from the cd> rpm -ivh rp-pppoe
3. Login as root.
4. Type "adsl -setup" at command prompt. You will see one message like this:
"Enter your login name".
5. Choose the interface you are using and then press
6. Press
7. Give the DNS server address and type "server" and press
8. Type your password carefully and press
9. Retype your password.
10. Press
11. Choose the firewall type "0"
12. If you want this connection at boot time type "Yes" or don't want to connect at boot time type "no"
13. and press "Enter".
14. After completed it will show you the following messages:
> Ethernet interface:eth0
> User name :root
> Activate on demand :No
> DNS server :supplied by ISP's server
> Firewalling :None
> User control :Yes

15. Accept this setting and adjust configuration files(y/n)?
Type "y" and press

Setup is completed.

16. For getting PPPOE connection
17. Type "adsl-connect" and press